is based in Mumbai-India
; we are established manufacturer, supplier and exporter in this clean room business. To make your products not affected or contaminated by environment is one of the three pillars we set our company on. Because of this, we developed turn-key solutions for industries like yours who require the most stringent specification in clean and sterile environments.
: professional Turnkey Complete Cleanrooms
, Modular Cleanrooms
, Modular Hard wall clean Rooms
, Modular Softwall Clean Rooms
, Modular Dry Clean room
or Dry Cleanroom
, LEED Cleanroom
, Medical Device Cleanrooms
, USP797 USP800 Cleanroom
, Cleanroom Ceilings
, Cleanroom Wall Systems
, Cleanroom Equipment
(Industrial Pre Filters
, Mini Pleat HEPA Filters
, Vertical Flow Clean Rooms
, Biological Safety Cabinets
, Laminar Air Flow
, Air Handling Unit
, Double Skin Type Air Handling Unit) design, manufacturing, installation and certification since 2000. We had built more than 100 cleanrooms. Axenic System Quality construction
: We manufacture all our components in house. Installation is done by our factory team. We will design, manufacture and install a custom cleanroom based on your application.
An Air Handling Unit, or Air Handler, is a central air conditioner station that handles the air that, usually, will be supplied into the buildings by the ventilation ductwork (connected to the AHU).
Handling the air means that the air will be delivered into the building spaces with thermo-hygrometric and IAQ (Indoor Air Quality) treatment. The accuracy of the process will depend from the specificity of each project (offices, schools, swimming-pools, laboratories, factories with industrial processes, etc). This means, the Air Handling Unit treat the air by filtering, cooling and/or heating, humidifying and/or dehumidifying.
There are several types of Air Handling Units: Compact, Modular, Residential, DX integrated, Low Profile (ceiling), Packaged, Rooftop mounted (typically on the roofs of buildings, with special weather protection), etc.
Air Handling Unit a minimum of components must consider, to know: at least 1 filtration section, 1 heat transfer component (cooling/heating coil or heat recovery system) and 1 fan.
The Air Handling Units can have several components, depending on the complexity and requirements, such as energy efficiency, of each specific building and application.
Some of the most known components are:
- Fans (Plug Fans, Double Inlet, Single Inlet, Axial, etc)
- Filters (Plate Filters, Bag Filters, Compact Filters, EPA Filters, HEPA Filters, ULPA
- Filters, Carbon Filters)
- Cooling/Heating Coils (water/steam/Direct Expansion DX/electric/gas fired
- Heat recovery systems (cross flow plate heat exchangers, cross flow plate heat
- exchangers, heat wheel/rotating heat exchangers, run around coils and heat pipes,
- Humidifiers (Adiabatic/Evaporative Pad, non-pressurized Steam, pressurized steam)
- Dehumidifiers (DX coil, desiccant rotor)
- Ultraviolet UV disinfection lamps
- Photo catalytic oxidation (PCO) air cleaners
- Sound attenuators
- Mist/Droplet eliminators